Fully Automatic Auto Bender With Bending Cutting Notching And Lipping 910C Model For 1.5/2/3pt Steel Rule

Completely Computer Control Diecutting rule Auto Bending Machine for Dieboard making

Main technical specifications
90 ° minimum R no repair knife              1.5 mm (support blade thickness 0.71)
                                                               2.0mm (support blade thickness 1.07)
180 ° minimum R no repair knife             2.5mm (support blade thickness 0.71)
                                                               3mm (support blade thickness 1.07)
Maximum bending  $                               1000 mm
Maximum bending angle                         120 °
Minimum 90 ° bend size                          3 mm
Minimum bending full circle diameter      5mm
Feeding accuracy                                   ± 0.05mm
Tail minimum shear size                          0.5mm
Bending flatness                                     ± 0.2 mm
Bridge size                                              Width 6mm height (any adjustable)
Support for file types                               Dxf.ai.plt
Equipment size                                        2.6m * 0.7m * 1.65m (without automatic cutter length)
User environment                                    Ventilation, dry below 40 degrees
Gear drive, double screw continuous feeding, up and down the separation of automatic olecranon, bridge, olecranon are used motor,
Change the previous cylinder mode, low noise, fast, high precision.
Equipment size:                                       about 250cm × 70cm × 165cm,
Equipment weight:                                   450Kg
Power supply specifications:                    220V AC 50Hz 1.2kw
Pneumatic pump:                                     4Kg / cm2 pressure, 10mm pipe diameter (gas is mainly used for clean waste)
Software operating platform:                   XP Windows7
Supported languages:                             English, Chinese
Support output file format:                       DXF, AI, PIT
Knife height range (Note):                       8.0-30mm
Thickness range of knife (Note):             0.45-1.07mm
Cutting shape (Note):                              Lipping (23.8mm-30mm high), left and right middle straight cut, left and right Lipping
Bridge (Width):                                        6.0mm width software can be set, height arbitrary adjustment, motor control, no noise type.

The main configuration
Imported servo motor drive screw continuous feeding two - way scissors
Third, the applicable industry
Widely used in the electronic version of Daomo, box Daomo, card Daomo, dolls and plastic Daomo and other industries.

The characteristics described
Using a unique double-screw face back to the way to send knife way, fast, high precision, error control in the 0.02MM-0.05MM. Bending institutions using gear transmission, for a small angle, aircraft holes, butterfly holes have advantages, high speed and high precision, is the production box, tag, blister of choice. Up and down separation before and after the two-way automatic olecranon, the domestic initiative. Wu limited automatic hit the olecranon. Knife height range: 8MM-30MM, thickness range: 0.15MM-1.07MM.

Suitable for graphics
Cartons, dolls, cartoons, flower board laser knife mold, and so on.